Product Introduction

This product is a single core flexible cable designed specifically for solar power distribution systems. It has high flexibility, low temperature toughness, high temperature resistance, acid and alkali resistance, ozone resistance, humidity and heat resistance, and UV resistance. It is suitable for photovoltaic power stations, junction boxes, connectors, inverter combiner boxes, and other fields with a rated DC voltage of 1800kV and below.
The characteristics of photovoltaic cables are determined by their special insulation materials and sheath materials. We call them cross-linked PE and cross-linked PO, which are expressed in XLPE or XLPO. After irradiation by an irradiation accelerator, the molecular structure of the cable materials will change, thus providing various performances. In fact, during installation and maintenance, cables can be routed on sharp edges of the roof structure, and must withstand pressure, bending, tension, cross tensile loads, and strong impacts. If the strength of the cable sheath is insufficient, the insulation layer of the cable will be severely damaged, which will affect the entire service life of the cable, or lead to problems such as short circuits, fire, and danger of personal injury. The UV resistance and flame retardancy of the online cable have been greatly improved, and the waterproof and alkali resistance of the cable have been reinforced and improved

Product structure diagram

Conductor: Tinned copper wire, complying with IEC60228 Class 5 copper conductor (soft conductor)
Insulation: halogen-free low smoke flame retardant irradiation cross-linked polyolefin, black/white
Sheath: Halogen-free low smoke flame retardant irradiation cross-linked polyolefin, black/red

product details

Product Name: Photovoltaic Cable
Product model: PV1-F H1Z2Z2-K 62930 IEC 131
Application:
Applied to photovoltaic power generation systems with a nominal 1.5KV DC voltage between conductors and between conductors and ground;
• Structure:
Conductor cross-section: 1.5mm ²- 240 mm ² (Other specifications can be customized);
Conductor: Tinned copper stranded wire, in accordance with EN60228, Class 5 soft conductor (soft conductor);
• Insulation: Low smoke zero halogen radiation cross-linked polyolefin environmental protection insulation material (XLPO/XLPE);
• Sheath material: Low smoke zero halogen radiation cross-linked polyolefin environment-friendly UV resistant sheath material (XLPO/XLPE);
Insulation color: black/white (other colors can be customized);
Sheath color: black/red/(other colors can be customized);
Rated voltage of the cable
• DC 1.5/1.5kV DC
Test voltage: 6500V, 50HZ, 5 minutes;
• Temperature level:
-45 ℃ to 120 ℃;
• Environmental temperature:
-40 ℃ to+90 ℃;
• Service life: 25 years (through TUV/UL);
Maximum short-circuit temperature:
250 ℃, bending radius: fixed installation>4D; Mobile installation>5D;
• Fire performance: EN 60332-1-2:2004; 
• Smoke emissions: IEC 61034; Minimum 60% transmittance; 
Low fire load: DIN 51900; 
• Certification: TUV EN50618:2014; 
Application standards:
TUV EN50618:2014
According to UNE-EN 60216-2, the estimated lifespan is 30 years.